Foundries producing medium to very large volumes of castings on high-speed molding lines demand large volumes of prepared sand and maximum productivity from the sand plant. The Simpson Multi-Mull® is specifically designed to provide medium to very large volumes of high-quality molding sand on a continuous basis and utilizes the same effective mulling technique as the Simpson Mix-Muller®.

 

As molding lines get larger and faster, modern foundries require larger volumes of high quality molding sand produced at the lowest total cost. Foundries that use batch mixers experience downtime when they do not have an adequate supply of sand. In addition, these batch mixers produce non-uniformity in the molding sand which negatively impacts the quality of castings.

Imagine if …

Your total daily requirement of sand could be mulled in one big batch, stored in a sealed bin and fed to the system only as required.
The sand properties of your last mold of the day could be as consistent as possible to the first mold that day.
The above could happen primarily because all sand variables are cancelled out.

The Simpson Multi-Mull is a medium speed, high intensity continuous mixer that is like no other. The synchronized dual muller and overlapping dual plow design enables sand and additives to be circulated and recirculated in a figure 8 movement within the Multi-Mull where they receive maximum exposure to mulling action before final discharge through a modulating door.

The Multi-Mull gives you an advantage over your competitors by: 

• Delivering a continuous supply of sand, on-demand
• Consistently providing discharged sand of superior quality and uniformity
• Producing high quality molding sand at a lower cost than any other solution
• Protecting margins through lower energy consumption
• Wasting no operating time on batching, charging, discharging, pre-mull dispersion or wetting of bond
• Requiring far fewer system components Example: (1) Multi-Mull = 23 components vs. (2) Small Batch Mullers = 85 components
• Lowering installation cost and reducing maintenance
• Reducing profit-robbing downtime

For high-volume, high-quality, cost-effective casting production, the Simpson Multi-Mull is the best solution. This technology produces larger volumes of molding sand at a lower cost of installation and operation than any other mixer in the world.

Foundries have the unique ability to increase productivity of their sand, reduce wear parts, and maintain the current footprint by converting from batch systems to continuous with the Simpson Multi-Mull. Here is an example:

Large DISA/Iron Foundry–

•  6x 100B-250 Simpson Speedmullors
• 6x Simpson Hartley Controllers and 90Mk2 Bond Dosing Systems
• 2,720 kg @ 120s cycle time = 82 t/h x 6 = 492 t/h sand preparation
• 1,500 total HP (1,100 kW)
• 328 t/HP

New Sand System –

•  4x #26G-400 Simpson Multi-Mulls
• 4x Simpson Hartley Controllers and BAS Bond Dosing Systems
• 8,845 kg @ 150s retention time = 212 t/h x 4 = 848 t/h (+356 t/h)
• 1,600 total HP (1,175 kW)
• 53 t/HP (61% more than batch)
• Reducing components from 85 for 2 Speedmullor batch systems to 23 components for one Multi-Mull
• Reducing controllers and bond dosing from 6 to 4

• Sand Preparation Brochure – standard
• Sand Preparation Brochure – metric
• Multi-Mull Flyer - standard
• Multi-Mull Flyer - metric
• Photo Gallery
• Video